Viessmann VITOTRONIC 100 GC1B Service Manual download pdf (Page 58)

Installation

58

Making Space for Accessory Adaptors on the DIN Rail (CM2 only)

1. Push up on the bottom front of

the DIN rail clamp to remove and

set aside.

2. Using a flat head screwdriver,

remove the 4 ’spare’ DIN

terminals 23, 24, 25 and 26 one

at a time. Place the screwdriver

between the rail and the base of

the terminal and turn the

screwdriver clockwise . Discard

the removed terminals.

3. Re-install the DIN rail clamp by

hooking the latch of the clamp

around the top of the rail and then

push down on the front of the

clamp.

Note: See separate Installation

Instructions for accessory

adaptors.

5351 338 v1.6

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 131 132

Comments to this Manuals

No comments