Installation
48
Setting of the Adjustable High Limit (if required)
The adjustable high limit is supplied
with a factory setting of 95°C / 203°F
Adjustment to 100°C / 212°F
1. Disconnect power to control and
burner.
2. Using a suitable screwdriver,
lever out and remove the selector
knob ”R” behind the hinged cover.
3. Using a pair of pointed pliers, break
off the cams identified by the
shaded areas in the Fig. from the
stop dial.
A
75 to 1100°C
167 to 212°F
4. Fit the selector knob ”R” so that
the marking is in the centre of the
selected range.
Note the setting of coding address
”06”!
5351 338 v1.6
1.
2.
A
3.
IMPORTANT
If the system is operated in
conjunction with a domestic hot
water tank, ensure that the
maximum permissible domestic
hot water temperature is not
exceeded. If necessary, install a
suitable safety device for this
purpose.
WARNING
Comments to this Manuals