21
Emissions test mode for testing flue gas
with boiler water temperature raised
briefly. This test mode should only be
activated by your flue gas inspector dur-
ing the annual inspection.
Switch the emissions test switch (see
page 10 and 11) to .
The display will then show the follow-
ing:
The following functions are activated:
■ The burner is switched ON (the display
shows symbol ).
Note
Burner start-up can be delayed, e.g.
through fuel oil preheating.
■ Pumps are started.
■ The thermostat regulates the boiler
water temperature.
Ending emissions test mode
Set the emissions test switch to position
a
or
Close the flap (see page 8).
Emissions test mode
Emissions test mode
5592 669 GB
Comments to this Manuals